Sale

M61, M61L, and M61LL Drop-in to fit Surefire and Malkoff


Module

17 items left

Description

 

 

 

This is the Malkoff Devices P60 style Drop-in LED Conversion with solid brass heatsink construction.  The LED is a White (5700K) Luminous SST-20.

   

MODULE

APPROX OUTPUT at 6V APPROX CURRENT DRAW at 6V APPROX DISTANCE at 6V APPROX RUNTIME on 2x CR123 Batteries
M61 450 lumens 800ma 300+ feet 1.25 hrs + taper
M61L 230 lumens 300ma 200+ feet 5 hrs + taper
M61LL 100 lumens 150ma 100+ feet 10 hrs + taper

  

This design utilizes a custom orange peel reflector designed by Don McLeish.  The reflector offers a very nice balance between throw and spill.  It is an outstanding room lighter and short to medium spotter. It was designed specifically for use in the Malkoff MD2, Elzetta ZFL-M60, and SureFire 6P, 9P, 6Z, Z2, Z3, C2, C3, M2, G2, and G3 flashlights.  It may or may not fit other models.

The input voltage is 3.4 - 9 volts. Below 3.4 volts it will drop out of regulation and run direct drive.  This dropin is protected against reverse polarity.

This Malkoff Upgrade is designed for rugged service from the ground up.  It is fully potted to stand up to rough service and recoil.  This item is covered by Our Lifetime Warranty.

 

Things to Know Before Purchase:

A Fitting Ring (available on previous webpage) is required if used with a shock-absorbing head (ie Surefire M2 Combat Light or Surefire M951 Weapon Light)

The M61 will work in the Surefire M951, but do to variations over the production lifetime (of the 951) there are a few caveats:

  1. You may, or may not, need to stretch the tail spring on the M61.

  2. You may, or may not, need to use the black fitting ring we sell.

  3. If there is a black grommet in the throat of the light, it may need to be removed (snaps out) with needle nosed pliers.

If you need help with the installation, please feel free to give us a call.

The M61 will not work in SureFire Forends.  Please see our SureFire Forend specific models.

A M61 Lens Kit, or suitable equivalent, is required for use in the MDX Head (MD2 Flashlight).  To use the M61 in Elzetta Flashlights you will need the VME Lens Kit.  These are available on the Malkoff Devices Flashlights Parts webpage.

The M61 dropin was designed to operate at maximum output for extended times in metal lights.  Operating the unit for more than 15 continuous minutes on high in plastic lights (Surefire G2 and G3) may damage the dropin.  This is not an issue in metal lights or plastic lights with a metal head.  

If you have and all plastic G2 or G3, please choose the M61L or M61LL. 

WARNING: This light is capable of causing eye damage at close range. Please use the light responsibly!!!  

Made in the USA. Some parts not domestically sourced.

Disclaimer:

SureFire, LLC, which manufactures and sells Surefire® flashlights is not associated in any way form or fashion to Malkoff Devices. SureFire, LLC, does not manufacture, sponsor, warrant, or endorse any Malkoff Devices product advertised on this website. The use of the Surefire® trademark, a registered trademark of SureFire, LLC, is strictly for the purpose of identifying the host flashlight for the Malkoff Devices products advertised on this website. All other trademarks, copyrights, and graphics or text not owned by Malkoff Devices or any of its related companies that appear on this site are the property of their respective owners, who may or may not be affiliated with, connected to, or sponsored by Malkoff Devices.

Reviews